How to clean an HVAC systems's Air Filter?

HVAC system malfunctions can lead to the propagation of helplessly dirty air in the home, office, or even industrial workspace. Air filter cleaning is perhaps one of the most important tasks in any HVAC preventative maintenance. An air filter that is either excessively utilized or soiled would lead to a blockage, decreased efficiency and in some cases destruction of the system. This post will show you how to properly perform the air filter maintenance of HVAC systems. We also introduce one of the endorsed trusted air filter providers in the USA.

Switch Off the HVAC System

It is crucial to remember that at any point of the air filter cleaning, the last step to be done is switching off the HVAC system. This would not only prevent difficulties of attempting to take the filter off but would also aid in safeguarding the filter from potential damage. In addition, it would be critical to ensure that the power to the device is turned off to remove any risk of electric shock or other mechanical interaction.

Locate the Air Filter

The majority of air conditioning appliances and HVAC systems have their air filters situated inside a return air duct silhouette or around a blower compartment. To those who are not aware of where the filter is, please refer to the user manual or the manufacturer’s instructions. Healthy Filters indicates it to the user which filter to look for and where to change air filters on the HVAC systems.

Remove the Filter

Assuming one knows the filter’s location, the next step will be to the filter’s seat, and pull out the appliance from its housing. The initial position of the filter is very important as the same will have to be restored after filtering. Healthy Filters also solves the obnoxious wind issue, with “This Side Up” clearly labeled on filter ends.

Filter Maintenance

How to clean an air filter depends on the type of air filter you own. If the air filter is washable, to start the cleaning process, you need to vacuum both sides of the filter to get rid of dust and debris. As the case may be, if a filter happens to be dirty it may be washed using warm, but not soapy water and thoroughly scrubbed using soft plastic/bamboo bristled brushes. Always remember that the filter should first dry up that seated back again; otherwise it will not do its job properly. Within safe limits of well being, water is filtered to make sure that proper sanitation is attained since the filters are of hard plastic.

Restructuring the Filter Mask if Need Be

A filter of Healthy Filters range can simply be replaced as long it is just too dirty or the surface is damaged anyway. Filters of Deadly Filters range are put on the shelves allowing the systematic airflow in improved quality of air some HVAV equipment and systems to function at a higher level. The air must be replaced if that is not to cause some imbalance and impact on the health of the whole HVAC system.

Put the Filter Back

After cleaning and drying the filter, the operator should take considerable care when reinserting the filter back in the slot. In addition, verifying the direction of airflow will assist in making sure that the attached component is tightly fixed and the filter has been placed correctly.

Everyone is aware, and it is easy to forget the fact that cleaning the air filter of the HVAC system is very critical, but if the intention is to avoid harming the HVAC system, it should be done. It is advisable however to practice cleaning or changing the air filter regularly or at least routinely for energy efficiency and better air quality.